To enable IT admins to better manage the various aspects of Microsoft Teams and Skype for Business services, Microsoft is announcing the new Microsoft Teams & Skype for Business Admin Center.

Now, there’s an admin center just for calling and messaging.

This new portal will offer a unified experience to manage both Teams and Skype for Business and will also include Call Analytics and the Call Quality Dashboard. Admins can also get end-to-end insights and the ability to manage Teams settings on a user level in this new portal.

Following features are available in this release:

Microsoft Teams messaging policy: Create custom policies for messaging scenarios for your users.

User management: Assign policies and configure your users.

Microsoft Teams guest messaging settings: Control the messaging capabilities for guest accounts in Microsoft Teams.

Federation settings: Manage federation between tenants for Microsoft Teams and Skype for Business. (Please note that federation for Microsoft Teams and Skype for Business will roll out in stages and this setting might not be visible for you during the initial rollout.)

Audio conferencing: Configure dial-in numbers and settings for Microsoft Teams and Skype for Business.

If you spend most of your workday with Google’s browser, you’ll want to put these Chrome tips to work so you can get more done in less time.

Pinning tabs that you use throughout the day saves you screen real estate and keeps you from having to reopen tabs several times over. Right-click on a tab and select Pin tab to minimize it to the left side of the browser. It’ll be identifiable by the page’s favicon.

Keep in mind, when you close the browser, those tabs will reopen as pinned tabs when you relaunch Chrome. So if you don’t want to start your next session with 10 pinned tabs, you’ll need to unpin them by right-clicking and then selecting Unpin tab before closing the browser.

Reopen that tab you didn’t mean to close

There’s one, specific hotkey command that saves my bacon about 25 times a day: Control-Shift-T, which reopens the last tab closed. When you’ve got 70 or so different tabs open, you’re bound to close the wrong one from time to time.

That’s why it behooves you to memorize this command. Better yet, take a few moments to learn some of the other hotkeys shown here that will help you zip through your tabs, close them all, or quit Chrome altogether. Just as hotkeys help you work faster in Windows, the same level of convenience applies to Chrome.

Grab a Chrome extension

It’s very likely that your favorite desktop software has an accompanying Chrome extension that let’s you perform related tasks within the browser. If so, grab it. After all, the web touches a lot of aspects of the work you do. For example, Microsoft’s OneNote offers a useful Chrome extension for grabbing articles and other bits of the internet for later retrieval. Same goes for Evernote, another popular note-taking solution. And there’s a Chrome extension that notifies you of Skype alerts. Head to the Chrome Web Store to find the extensions you need.

Embrace Google Cloud Print

Google Cloud Print may still have that annoying beta tag, but it’s vastly improved since the service’s early days. It’s now reliable, and the fastest way to print a document without needing to futz with the Windows print menu.

Most printers can be added quite easily, so head to the Cloud Print site to enroll yours. Another great feature is that you can also save files right to Google Drive, helping you keep track of tax-payment confirmations or other key documents.

Know your history

Macs and iOS devices talk together very well through a feature called Handoff. Open a browser tab on the iPhone, and you can pull it up right away on your Mac.

Chrome has created something that’s not quite as seamless, but gets the job done for those of us who live outside of Fortress Apple. Control-H pulls up a list of your most recent tabs from all your devices. Next, touch Tabs from other devices to choose the site you want to check out. You can select what you were just looking at or something from a while back.

Go big (with text)

Save your eyes from strain. You can expand the text on a browser page in a couple of different ways. Hit Control+ to zoom in, and Control- to zoom out. Alternatively, pinching-and-zooming on a PC with a touchscreen will do the trick and gives you a more direct feel for what you want to see.

Control 0 will return you to the normal page size once you’re done with the close inspection.

Start off right

You can get right to work more quickly if you launch your browsing session with the sites you use most often. Go to Settings > On Startup and choose Open a specific page or set of pages.

Then, you can add your favorite pages by typing in the URLs or clicking the button for Use current pages. This’ll ensure that next time you launch Chrome, you can get right to work with the pages you need.

Have questions?

Get answers from Microsofts Cloud Solutions Partner!
Call us at: 856-745-9990 or visit: https://southjerseytechies.net/

South Jersey Techies, LL C is a full Managed Web and Technology Services Company providing IT Services, Website Design Services, Server Support, Network Consulting, Internet Phones, Cloud Solutions Provider and much more. Contact for More Information.

To read this article in its entirety click here.

Don’t expect your money anytime soon, however.

DVD drives may be a thing of the past, but the past could pay you $10 via a proposed settlement from a class-action suit.

If you purchased a DVD-ROM, DVD-RW or combination drive between April, 2003 and December 31, 2008, a collection of DVD drive manufacturers have tentatively agreed to pay you $10 per drive, whether you purchased the drive as part of a PC or by itself. You’ll simply need to visit the claim site and testify (under penalty of perjury) that you indeed purchased those drives within the given time period, and live in one of the 23 states (plus the District of Columbia) covered by the suit. The deadline to file is July 1.

Why this matters: Though the optical drive market continues to decrease—“the physical disk format is somewhat obsolete in the era of content streaming,” IDC wrote last year—that wasn’t the case fourteen years ago, when virtually all software was distributed via DVD-ROM. Fortunately, the settlement site isn’t asking for proof of purchase yet, but it reserves the right to do so. Filing a claim can take literally seconds, but don’t hold your breath—you’ll probably receive compensation, but there’s no guarantee.

The Wheels of Justice Turn Slowly

Simply put, a group of 23 plaintiffs sued virtually every DVD drive manufacturer, alleging that they collectively conspired to keep drive prices higher than they normally would be, in violation of antitrust laws. Though the defendants denied they did anything wrong, several—Hitachi-LG, Panasonic, NEC, and Sony—settled and agreed to pay a collective total of $124.5 million into four separate settlement funds.

(Note that only DVD drives for PCs are covered; a DVD player, such as the one gathering dust in your living room, isn’t.)

If you do submit a claim, however, the chances of receiving your settlement soon are slim. That’s because seventeen more defendants, including various subsidiaries of BenQ, Philips, Samsung, TEAC, and Pioneer, have yet to settle, and the suit will continue until all of the claims are resolved.

“Because other defendants remain in this litigation, the plaintiffs are proposing that distribution of the settlement funds not occur at this time,” the settlement site reads. “This is to save the expenses associated with distribution.”

In fact, the settlement hearing to finally approve the Hitachi-LG-Panasonic-NEC-Sony agreement will be held on December 8. After that, payments may begin—which means that you’ll probably receive your $10 or less a year from now. Yes, less: Payments will be “up to” $10 per drive, according to the claims site.

You should probably treat the settlement like one of those “print out your own rebate” slips from the turn of the century. Even under the best of circumstances, chances are you’ll have totally forgotten about your $10 windfall by the time the check arrives.

Have questions?

Get answers from Microsoft Cloud Solutions Partner!
Call us at: 856-745-9990

TECHIES is a full Managed IT Services Company headquartered in Marlton, New Jersey for over 20 years with a new location opening soon in Wilson, North Carolina. TECHIES provides Managed IT Services, Cybersecurity Solutions, Website Design Services, Dedicated Server Solutions, IT Consulting, VoIP Phone Solutions, Cloud Solutions, Network Cabling and much more.

Ransom is the top motivation behind cyber attacks, according to a report from Radware, and IT professionals are most concerned about data loss. Here’s what you need to know.

Nearly half of businesses report that they were the subject of a cyber-ransom campaign in 2016, according to Radware’s, Global Application and Network Security Report 2016-2017.

Data loss topped the list of IT professionals’ cyber attack concerns, the report found, with 27% of tech leaders reporting this as their greatest worry. It was followed by service outage (19%), reputation loss (16%), and customer or partner loss (9%).

Malware or bot attacks hit half of all organizations surveyed in the last year. One reason for the pervasive attacks? The Internet of Things (IoT). Some 55% of respondents reported that IoT ecosystems had complicated their cybersecurity detection measures, as they create more vulnerabilities.

Ransomware attacks in particular continue to increase rapidly: 41% of respondents reported that ransom was the top motivator behind the cyber attacks they experienced in 2016. Meanwhile, 27% of respondents cited insider threats, 26% said political hacktivism, and 26% said competition.

While large-scale DDoS attacks dominated the headlines of 2016, this report found that only 4% of all attacks were more than 50 Gbps, while more than 83% of DDoS attacks reported were under 1 Gbps.

“One thing is clear: Money is the top motivator in the threat landscape today,” said Carl Herberger, vice president of security solutions at Radware, in a press release. “Attackers employ an ever-increasing number of tactics to steal valuable information, from ransom attacks that can lock up a company’s data, to DDoS attacks that act as a smoke screen for information theft, to direct brute force or injection attacks that grant direct access to internal data.”

Despite the growth in attacks, some 40% of organizations reported that they do not have an incident response plan in place, the survey found.

The report listed five cybersecurity predictions for 2017:

1. IoT will become an even larger risk. The Mirai IoT Botnet code is available to the public, making it more likely that cyber criminals of all experience levels are already strengthening their capabilities. “In 2017, exponentially more devices are expected to become targeted and enslaved into IoT botnets,” the press release stated. “IoT device manufacturers will have to face the issue of securing their devices before they are brought to market, as botnet attacks from these devices can generate large-scale attacks that easily exceed 1 Tbps.”

2. Ransomware attacks will continue to grow. These attacks will target phones, laptops, and company computers, and will likely take aim at healthcare devices such as defibrillators in the future, the press release stated.

3. Permanent Denial of Service (PDoS) attacks on data centers and IoT operations will rise. PDoS attacks, sometimes called “phlashing,” damage a system to the degree that it requires hardware replacement or reinstallation. These attacks are not new, but Radware predicts they are likely to become more pervasive in 2017 with the plethora of personal devices on the market.

4. Telephony DoS (TDoS) will become more sophisticated. These attacks, which cut off communications in a crisis, “could impede first responders’ situational awareness, exacerbate suffering and pain, and potentially increase loss of life,” the press release stated.

5. Public transportation system attacks will rise. As cars, trains, and planes become more automated, they also become more vulnerable to hackers, Radware stated.

You help your business avoid ransomware attacks and other cyber threats by keeping software up to date, backing up all information every day to a secure, offsite location, segmenting your network, performing penetration testing, and training staff on cyber security practices.

Have questions?

Get answers from Microsofts Cloud Solutions Partner!
Call us at: 856-745-9990 or visit: https://southjerseytechies.net/

South Jersey Techies, LL C is a full Managed Web and Technology Services Company providing IT Services, Website Design Services, Server Support, Network Consulting, Internet Phones, Cloud Solutions Provider and much more. Contact for More Information.

To read this article in its entirety click here.

Whether you’re just starting high school or about to graduate college, our list of essential gear for students will ensure that you have a productive—and fun—school year.

Looking to put more pep in your PC’s step? These surprisingly cheap PC upgrades and accessories do the trick without breaking the bank.

Mattel’s ThingMaker 3D Printer and ThingMaker Design App is expected to ship later this year. Could a $300 3D printer capable of making hundreds of parts that can be assembled into toys finally place the technology next to the inkjet printer in the home?

The consumer 3D printer market, which has even tried to connect itself to video gaming, still seeks ‘killer app’

While 3D printer sales will experience healthy growth over the next four years, consumer machines remain a technology in search of a purpose, according to researcher IDC.

3D printers, materials and services in the U.S. grew by almost 20% in 2015 compared to the year before, representing $2.5 billion market. And 3D printer shipments are expected to experience a compound annual growth rate (CAGR) of more than 16% through 2020, according to IDC’s U.S. 3D Printer Forecast, 2016-2020.

Revenue from 3D printing hardware alone is expected to grow from $815 million last year to $1.96 billion in 2020.

The largest technology segment within the 3D printing market is fused filament fabrication or fused deposition modeling (FDM/FFF). Last year, FFF or FDM printers made up 76% of the 3D printers shipped in the U.S.

While the majority of those printers are at the low end of the market, the consumer segment “has clearly not materialized as many had predicted,” IDC said. That’s pushing many 3D printer makers to shift toward producing higher-end machines aimed at the education and professional prototyping markets.
Shipments in the very low-end, where 3D printers sell for below $1,000, are still projected to grow more than 12% annually through 2020. But the market remains relatively small.

Where’s the killer app?

“I know it is a bit of a cliché, but I believe the ‘killer app’ that would drive 3D printing in the consumer space has not materialized yet,” said Tim Greene, research director for IDC’s Hardcopy Solutions. “Already the 3D printer mix in the U.S. has changed over the last 12 to 24 months. While there are still a lot of shipments into the DIY/consumer market, tremendous growth remains in the segments with a more professional and manufacturing orientation.

Simply put, 3D printers have yet to find their spot next to the inkjet printer in the home.

The sub-$1,000 3D printer category is the slowest-growing segment based on the reduced demand for consumer-type 3D printers in the U.S. market, IDC found. Many of the suppliers of lower-priced machines have added features and capabilities to their printers to move up into higher-priced hardware.

Printers in the sub-$1,000 price category are expected to go from just over 49,900 shipments in 2015 to over 90,750 printers in 2020. That’s a five-year annual growth rate of 12.7%.

In its report, IDC said it “has never been a big believer” in the consumer 3D printing market.

“This is being borne out somewhat with many of the suppliers in that segment recognizing that the consumer segment has materialized differently than expected. While some suppliers continue to sell very low-end 3D printers at prices below $300, many have recognized that consumer users will not run enough material, or won’t buy the materials from their printer manufacturer, to make up for selling printers at such low prices,” the report said.

In the hunt for the “killer application,” many 3D printer manufacturers have attempted to link the machines with video games, enabling players to print characters and scene-setting models.

“Which certainly eventually could happen, but we don’t see it in the near term,” Greene said. “So, while I’d never say never, I think the lack of the real ‘gotta have it’ application for consumer 3D printing limits the potential for the consumer side for now.”

Terry Wohlers, president of Wohlers Associates, an independent consulting firm, said the consumer 3D printer market is hampered more by a reason to exist and less by a lack of affordable technology.

“You could give away a free 3D printer to average consumers, but I doubt it would motivate them to use it. They’d give it a try, but then it’d collect dust. It’s just too difficult for them,” Wohlers said. “Heck, they don’t even want to print pictures at home because they don’t want to mess with it. A 3D printer is an order of magnitude more involved.”

Mattel to the rescue

“I would argue that a consumer 3D printer does not yet exist,” Wohlers continued. “This could change when Mattel introduces its new ThingMaker later this year.”

In February, Mattel announced it had reinvented its iconic ThingMaker at-home toy-making device, this time as a 3D printer that will cost $300.

Mattel unveiled its plug-and-play 3D printer at the New York Toy Fair, and it is already taking pre-orders for the machine, which will be available Oct. 15. (See Amazon.com pricing).

After downloading the ThingMaker Design App, which is based on software from Autodesk, families can browse through toy templates or build their own creations from hundreds of parts also offered in loadable files. Designs get uploaded from the files to the ThingMaker 3D Printer, which prints parts in batches for assembly via ball-and-socket joints.

The ThingMaker Design App allows you to download files to iOS or Android devices and then upload them to the 3D printer to create toys.

“For 15-plus years, I’ve believed that children could become a large market because they are creative, like to make objects, and entertain themselves,” Wohlers said. “New software tools for creating 3D content, coupled with products for children, such as the ThingMaker, could change the landscape some.”

Meanwhile, Wohlers said, most consumers will purchase 3D-printed parts and products online and at shops and stores — products designed by professionals on industrial-grade machines.

In addition to a lack of use cases, the consumer 3D printer has become a low-margin product, as Chinese equipment and filament manufacturers have combined with multiple distribution channels (including Amazon.com) to create a segment where it is really hard to achieve profit margins, Greene said.

“In turn, this has made companies like 3D Systems and Ultimaker re-think some of their product and areas of focus,” Greene said. “Furthermore, there is a growing number of online 3D printing services like Sculpteo [and] Shapeways…that make it so fast and easy for consumers to get their stuff 3D printed that it seems like consumers don’t need their own 3D printer.”

In May, Ultimaker and Ultimaker added the Ultimaker 2+, which sports a price tag  more than twice the original $999 Ultimaker.

“And in a hallway conversation at a recent trade show, one of their guys told me they are ‘less interested’ in slugging it out with the other vendors in the sub-$1,000 price category,” Greene said.

3D Systems shifts gears
3D Systems is also less interested in the consumer 3D printer market, which it entered into in 2011.

At the end of 2015, 3D Systems announced the end of its $999 Cube consumer 3D printer line and said it would also shutter its Cubify.com consumer printing platform by January 31.

“We still have the Cube Pro printer — that’s sub-$5,000, but that’s kind of our entry level now on the desk tops for applications like education and desktop engineering,” said Timothy Miller, 3D Systems’ director of corporate communications.

“We’re focusing on manufacturing and the professional customer because that’s where we see near-term opportunities,” Miller added.

3D Systems was among the first 3D printer manufacturers when it was founded in 1984; its CTO, Chuck Hull, was one of the inventors of the 3D printing technology and created the widely-adopted STL (stereolighography) file format used by machines today.

Over the past two years, however, 3D Systems’ stock has dropped precipitously from a high of about $97 per share in 2014 to a low of $6.29 in May. Today, it’s trading for around $12.

And, in April, 3D Systems replaced its interim CEO with Vyomesh Joshi, the former vice president of imaging and printing at HP who is credited with doubling profits there.

Miller said while the company is will soon announce a new long-term strategy, it has already shifted toward producing more professional machines aimed at up-and-coming markets, including 3D printers for production.

Wohlers said 3D Systems’ financial issues have less to do with the industry’s downward trajectory and more to do with the company’s lack of focus and increased competition.

In 2011, for example, 31 companies worldwide produced and sold industrial 3D printers — those priced at more than $5,000. Five years later, that doubled to 62 companies, according to theWohlers Report 2016.

As with the beginning of the 3D printing industry, the highest growth markets for the technology continues to be automotive, healthcare and aerospace. However, along with rapid prototyping, 3D printing production parts is beginning to take shape.

Where the market is headed

According to IDC’s report, the fastest-growing segment in the 3D printing industry is in the $25,000 to $100,000 price category — printers that use a mix of technologies for both plastic and metal printing for use in markets including dental, medical, automotive and aerospace.

Last year, for example, HP announced it would enter the 3D printed parts manufacturing space with a machine aimed directly at production, not the consumer market. HP’s machine, a ink-jet like “materials jetting” system, is part of a market expected to grow faster than any other, according to IDC.

“As applications become more advanced and complicated, people don’t just want a prototyping printer, but a solution they can build into their workflow,” Miller said.

For example, Align Technology 3D prints 175,000 Invisalign dental braces every day.

Earlier this month, 3D printing service provider Sculpteo released its annual State of 3D Printing report, which collects survey responses from the general public from late January to late March 2016.

This year, Sculpteo received more than 1,000 respondents.

The survey found that the primary uses for 3D printing remain prototyping (50%) and proof of concept (30%), with manufacturing production coming in third (20%). Companies responding to the survey revealed that 93% of organizations believe 3D printing gives them a competitive advantage, and the top priority for professionals using 3D printers is faster product development.

“People and companies that are adopting 3D printers are routinely realizing the tremendous time and cost savings in their product creation and development cycles,” Greene said. “As printer speeds increase and the range of materials expands, a growing number of products and parts, and therefore markets, will be impacted by 3D printing/additive manufacturing.”

Have questions?

Get answers from Microsofts Cloud Solutions Partner!
Call us at: 856-745-9990 or visit: https://southjerseytechies.net/

South Jersey Techies, LL C is a full Managed Web and Technology Services Company providing IT Services, Website Design Services, Server Support, Network Consulting, Internet Phones, Cloud Solutions Provider and much more. Contact for More Information.

To read this article in its entirety click here.

If you still think Fitbit’s wristbands are the coolest wearables around, you’re behind the times. These lesser-known fitness gadgets are designed to help improve your health, and they’re all worth a look.

Want to never see a promoted app in the Start menu again? Follow this step-by-step guide for home users and businesses.

Microsoft is to double the number of adverts for apps that appear in Windows 10’s Start menu.

Windows 10’s Start menu currently has five tiles that display ‘promoted apps’, which are Windows Store apps the user hasn’t installed on their PC. Three of these tiles are links to apps on the Windows Store and two are Windows Store apps that Windows 10 has previously automatically installed on the machine.

In future versions of Windows 10, the number of ‘promoted apps’ tiles in the Start menu will rise to 10. To make room, the number of tiles linking to apps installed on the machine will decrease, from 17 to 12.

Microsoft discussed the changes at the Windows Hardware Engineering Conference in late April, as part of a briefing on new features in the Windows 10 Anniversary Update, due out this summer.

It remains unclear whether all versions of Windows 10 will eventually see the Start menu changes or just new installs. Microsoft has been contacted for clarification.

If you don’t want adverts appearing in your Windows 10 Start menu, here’s how to remove them.

For home users

One option for removing these tiles is to install Classic Shell. The software will allow you to customize the look and feel of Windows, including changing the Start menu to resemble that of Windows 7 or earlier Microsoft operating systems.

If you don’t want to do that, here’s how to manually remove each tile from the Start menu.

In the slides below, you can see which tiles you will want to remove to get rid of promoted apps. Figure A shows the layout of promoted app tiles before the Anniversary Update changes and Figure B shows after.

If you spend most of your day at a desk, any one of these tech tools will make your work station more comfortable and give your body some much-needed relief.

Do you work long hours on your computer? If so, we know the feeling and have identified a list of gadgets that you can use at your workstation, and which offer the necessary support and comfort as you work. While some may require making some adjustments or take some getting used to, your body will grow to love any of these devices — in the form of reduced aches and pain.

Kensington SmartFit Conform Back Rest

If you don’t have an ergonomic chair, the Kensington SmartFit Conform Back Rest lets you convert a plain office chair into one. The attachment fits onto most chairs with a back, and delivers support for your spine and lumbar using two ventilated back panels resting on four independent springs. The fit can be slightly adjusted for support that is highly comfortable, while the fabric itself can be removed for washing.

Price: $60

[ Find it on Amazon ]

Microsoft Sculpt Ergonomic Keyboard

The Microsoft Sculpt Ergonomic Keyboard sets a new standard for the support and comfort of your wrist for those who type a lot at work. The split keyboard layout and arc shape of this wireless keyboard helps keep hands and arms in a relaxed position to significantly reduce the risk of repetitive stress injuries. The numeric keypad comes as a separate device so right-handers can hold their mouse at a more accessible angle. Though the keyboard does take some getting used to, you’re soon be wondering why you ever settled for the cramped layout of a normal keyboard.

Price: $81

[ Find it on Amazon ]

Microsoft Natural Ergonomic Keyboard 4000

The Microsoft Natural Ergonomic Keyboard 4000 adopts a similar split keyboard layout and arc shape of the Sculpt Ergonomic keyboard, though in a more conventional wired keyboard design. In addition, it comes with additional multimedia buttons that can be customized to quickly access files, launch web pages and create hot keys shortcuts to get things done faster. A dedicated slider located in the middle of the Natural Ergonomic Keyboard 4000 also makes it easy to zoom in and out.

Price: $50

[ Find it on Amazon ]

Logitech MX Master

The Logitech MX Master is a wireless desktop mouse that offers a sculpted design meant to support your hand and wrist in a comfortable and natural position. Aside from the usual plethora of technologies such as dual Bluetooth and RF wireless modes and support for pairing with up to three devices, the MX Master also comes with a couple of additional capabilities that should reduce wrist fatigue. For example, a speed-adaptive scroll wheel makes scrolling through long documents easier than ever with its ability to automatically shift between normal “click-to-click” scrolling to hyper fast scroll, while a thumb wheel offers side-to-side scrolling.

Price: $100

[ Find it on Amazon ]

Kensington Expert Mouse Wireless Trackball

Users who find that a normal mouse just doesn’t cut it for them will appreciate the use of a trackball-based solution such as the Kensington Expert Mouse Wireless Trackball. The giant trackball help keeps wrist and hand movement is kept to a minimum, and uses optical tracking technology for smooth control. Notably, the Expert Mouse Wireless Trackball works just as well for right-handed and left-handed users, while a scroll ring positioned around the trackball also makes it easy to scroll up and down lengthy documents or Web pages.

Price: $100

[ Find it on Amazon ]

Microsoft Sculpt Ergonomic Mouse

Shaped almost like a slightly squashed softball, the Microsoft Sculpt Ergonomic Mousewas created to offer a more natural hand, wrist and forearm posture. While its ergonomic design may take get some getting used to, the Sculpt Ergonomic Mouse is arguably more like a normal mouse than some of the other vertical mouse designs on the market. A thumb scoop is positioned to help maintain the correct hand and wrist position, while the scroll wheel supports four ways scrolling: Left, right, front and back.

Price: $60

[ Find it on Amazon ]

Swiftpoint GT Mouse

The Swiftpoint GT mouse is a compact, travel-friendly mouse designed to reduce fatigue caused by your normal portable mouse. The Swiftpoint GT’s pen-like grip is more natural than the claw grip that is necessary for many of the travel mouse out there, yet is small enough to be used on your laptop next to the touchpad. Moreover, it has a touch surface that enables a full range of touch gestures such as swiping, flicking and zooming. You can also easily “park” the Swiftpoint GT on your laptop when moving between meetings with its included magnetic clip.

Price: $149

[ Find it on Amazon ]

Kensington SmartFit Mouse Pad

The Kensington SmartFit Mouse Pad is created to combat improper positioning of one’s wrist when using a mouse. It comes with a soft gel support to relief pressure points on the wrist, and stands out from your run-of-the-mill mousepad by how its height can be adjusted with the use of removable inserts. A nonskid base adds stability, while an anti-microbial surface to resist strains and odors to set the SmartFit Mouse Pad further apart from the rest.

Price: $20

[ Find it on Amazon ]

Ergotron WorkFit-P, Sit-Stand Workstation

Laptop users looking to get off their butts in the office can consider the Ergotron WorkFit-P, Sit-Stand Workstation, an elegant height-adjustable laptop stand. Made of solid-aluminum construction, the WorkFit-P works like a standard monitor arm in how it can be quickly adjusted various positions – including for use while standing. The large surface has more than adequate space for a laptop and external mouse, and can also serve as an adjustable tray for writing or drawing with a graphics tablet.

Price: $299

[ Find it on Amazon ]

HiRise for MacBook

While its name suggests that it can only be used for a MacBook, the HiRise for MacBook is a height-adjustable stand that works just as well for other laptops. The beautiful brushed metal design aside, the stand lifts your laptop up to a half foot off the desk, bringing it to a more optimal height for your overstrained eyes. You will need a separate keyboard and mouse to work with your machine, but laptop’ keyboard and trackpad were never great for ergonomics anyway.

Price: $70

[ Find it on Amazon ]

Ergotron MX Mini Desk Mount Arm

The Ergotron MX Mini Desk Mount Arm is a monitor arm that offers a slim profile without giving up on the expansive height adjustment range of full-fledged monitor arms, including full tilt, pan and rotation capability. This means you can set the ideal height and angle for optimal individual comfort, and adjust it as necessary to avoid the morning or mid-afternoon glare. The MX Mini Desk Mount Arm works with lightweight LCD monitors of up to 24-inches, as well as tablets such as the Apple’s iPad and Microsoft’s Surface.

Price: $315

[ Find it on Amazon ]

Have questions?

Get answers from Microsofts Cloud Solutions Partner!
Call us at: 856-745-9990 or visit: https://southjerseytechies.net/

South Jersey Techies, LL C is a full Managed Web and Technology Services Company providing IT Services, Website Design Services, Server Support, Network Consulting, Internet Phones, Cloud Solutions Provider and much more. Contact for More Information.

To read this article in its entirety click here.